- Joined
- Jan 29, 2014
- Messages
- 21,923
- Reaction score
- 9,308
- Location
- Montgomery, NY, USA
- VCDS Serial number
- C?ID=57337
It seems to me OP that you are not testing the harness correctly or have addressed the black tape FOD enough?
You need to verify the wiring can carry current and not just voltage to components.
Disconnect all sensors & module and tone plus load test each track.......I mean authenticate every one of them.
Fix all or replace the harness & needed parts as per the RTFB.
Only install parts that belong with the proper part number & index, further based on VIN number and PR codes.
Don't fuck around with this safety stuff!
NostraJackASS Has set you to Ignore a second time going forward & for doing stupid nefarious cheapo shit that could or does hurt others!
You need to verify the wiring can carry current and not just voltage to components.
Disconnect all sensors & module and tone plus load test each track.......I mean authenticate every one of them.
Fix all or replace the harness & needed parts as per the RTFB.
Only install parts that belong with the proper part number & index, further based on VIN number and PR codes.
Don't fuck around with this safety stuff!
NostraJackASS Has set you to Ignore a second time going forward & for doing stupid nefarious cheapo shit that could or does hurt others!