Q7 Door coding - help please

Hi Guys

I kind of messed up door coding on a friends audi q7

the story is he wanted to enable fold mirros on lock so I with into door module for drivers door and in 'coding' rather than add the values to original value, i wiped it and replaced with what i thought was correct and saved it without noting the old code.

he now tells me the door controls work the wrong way round? down is up and up is down, closing door is opening door, n stuff? this is drivers door?

its a 2009 audi q7 - uk model - has folding mirrors. i understand you cannot reset the code so was hoping someone can help me sort this one out? can I grab the passenger door code and put this in drivers door to sort this? i really need help please?

VCDS saves a log of all changes to coding and adaptation channels, look at those and reverse the changes you made to the Q7.

thanks for your reply, where can i find the logs?

Look in the Debug sub-folder.

-Uwe-

Thanks ill take a look there later tonight when I get a chance.

Quick question, I did a full scan before I made the changes. Under Address 42: Door Elect, Driver I can see 'Coding: 0002651' would this be the original value before I made the change?

Assuming we're talking about the driver side door control module, then yes.

Legitimate VCDS systems can be purchased directly from us:
https://store.ross-tech.com/shop/cat/VCDS

... Or from any of our authorized distributors:
http://www.ross-tech.com/distributors.php#uk

Please let us know when you have one so we can adjust your forum status.

-Uwe-