HexNet dead after update

   #1  

fredthe

Verified VCDS User
Verified
Joined
Jun 6, 2016
Messages
3
Reaction score
1
Location
USA
VCDS Serial number
C?ID=279855
So I need to scan my car, and I got prompted to update VCDS. I updated to 18.1, and it said my Hex-Net needed an update. So I connected it via USB cable, and it looked like the update took. But now When it powers up the light flashed green at first, then flashed red; and VCDS can't see it over USB any more. I uninstalled/reinstalled VCDS but still no luck.

Have I bricked my interface?

-Fred
 
   #3  

fredthe

Verified VCDS User
Verified
Joined
Jun 6, 2016
Messages
3
Reaction score
1
Location
USA
VCDS Serial number
C?ID=279855
Ah, Nevermind. I found the VCIConfig utility, which was able to re-flash it.

Edit: And thanks for the amazingly fast response!
 
  • Like
Reactions: Uwe
Back
Top