Results 1 to 3 of 3

Thread: Introducing and a problem on my car.

  1. #1
    New User
    Join Date
    Dec 2017
    Location
    Netherlands
    Posts
    3
    Post Thanks / Like

    Introducing and a problem on my car.

    Hello ,

    this i my first post here , i come from the Netherlands and i drive a 2011 seat leon cupra r.

    in my spare time i fix cars and specially vag cars.

    recently i did a retrofit but it does not work correctly.

    i try to get the mirror down working on my leon, i fitted an new motor with memory and i have fitted the wiring from a golf 6.

    i had to code module 52 and module 09. but when i shift in reverse gear the mirror goes up.

    and it will not go back to its home position.

    does anyone know if this can be fixed ?

    Address 52: Door Elect, Pass. Labels: 3C0-959-70X-GEN4.clb
    Control Module Part Number: 1T0 959 702 AC HW: 3C0 959 792 A
    Component and/or Version: TUER-SG BT 002 0311
    Software Coding: 0015B0
    Work Shop Code: WSC 99999 123 12345
    ASAM Dataset: EV_DCU52BrosePasseSide A03004 (SE35)
    ROD: EV_DCU52BrosePasseSide.rod
    VCID: F9F3C533780D608D72-80AC
    1 Fault Found:

    66821 - Position Sensor for Mirror Adjustment
    B11FA 29 [008] - Signal Implausible
    Intermittent - Confirmed - Tested Since Memory Clear
    Freeze Frame:
    Fault Status: 00000001
    Fault Priority: 2
    Fault Frequency: 3
    Reset counter: 214
    Mileage: 179769 km
    Date: 2082.14.03
    Time: 17:24:09

    this is the scan from the module 52

    thanks

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    18,759
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Roelb79 View Post
    this i my first post here
    No, it is not.

    Quote Originally Posted by Roelb79 View Post
    recently i did a retrofit but it does not work correctly.
    Please Get Verified so we can move this to the correct (Retrofits) section of the forum.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    New User
    Join Date
    Dec 2017
    Location
    Netherlands
    Posts
    3
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    No, it is not.


    Please Get Verified so we can move this to the correct (Retrofits) section of the forum.

    -Uwe-
    You are correct i did post something here , i have send a reply to a member.
    About get verified , i have bought my vcds cable from the original buyer. That is the reason that i am not verified.

    Thanks

    Roel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •