Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Long coding decrypting.

  1. #1
    Pirate
    Join Date
    Jan 2018
    Location
    UK
    Posts
    6
    Post Thanks / Like

    Long coding decrypting.

    Hi guys New to this. My original control module part No. 1K0907379AD failed and so replaced it with 1K0907379AN. There's no long coding on the module just zeros and the helper says limited info in this controller. what info do I need to to come up with the code? Any help would be greatly appreciated thanks.

  2. #2
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    955
    Post Thanks / Like
    First thing is to post a VCDS Auto-Scan with the current module fitted, and if you have one with the previous module fitted as well that would help.

  3. Likes iichel, Uwe liked this post
  4. #3
    Pirate
    Join Date
    Jan 2018
    Location
    UK
    Posts
    6
    Post Thanks / Like
    Ok thanks will do.

  5. #4
    Pirate
    Join Date
    Jan 2018
    Location
    UK
    Posts
    6
    Post Thanks / Like
    Code:
    Removed.   Data from a clone/pirate copy of VCDS is not welcome here.
    --
    Last edited by Uwe; 01-20-2018 at 09:56 AM.

  6. #5
    Pirate
    Join Date
    Jan 2018
    Location
    UK
    Posts
    6
    Post Thanks / Like
    This the scan with the old module.

  7. #6
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    446
    Post Thanks / Like
    Have you tried just inputting the old ABS coding to new module? They're same generation and so close to each other in product code that it should go in without problems.

  8. #7
    Pirate
    Join Date
    Jan 2018
    Location
    UK
    Posts
    6
    Post Thanks / Like
    This is with the new module on.

    Code:
    Removed.   Data from a clone/pirate copy of VCDS is not welcome here.
    Last edited by Uwe; 01-20-2018 at 09:56 AM.

  9. #8
    Pirate
    Join Date
    Jan 2018
    Location
    UK
    Posts
    6
    Post Thanks / Like
    Yes I tried just said code rejected out of range

  10. #9
    Ross-Tech Employee Eric's Avatar
    Join Date
    Jan 2014
    Posts
    2,295
    Post Thanks / Like
    All bets are off when you're using a pirated interface
    You ain't metal till you got a clutch pedal

  11. #10
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    11,479
    Post Thanks / Like
    Yeah man crap out........



    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts

    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •