Results 1 to 3 of 3

Thread: Case Study - Who is handing out wrong parts?

  1. #1
    Ross-Tech Employee Jef's Avatar
    Join Date
    Jan 2014
    Posts
    1,468
    Post Thanks / Like

    Case Study - Who is handing out wrong parts?

    A common question I ask pretty much every day:

    Sooooooo...... where did you get that part from?

    So here is today's version of that question.

    Model Audi Q7 qu. 3.0
    AQ7
    Date of production 31.08.2010
    Year 2011
    Sales type 4LB5ZA
    Engine Code CJWC

    16400/P0016/000022 - Bank 1: Camshaft Position Sensor (G40) / Engine Speed Sensor (G28): Incorrect Correlation
    16396/P0012/000018 - Bank 1: Camshaft A (Intake): Advance Setpoint not Reached (Over-Retarded)
    P0017/000023 - Bank 1: CMP Sensor 3 (G300) / Engine Speed Sens (G28): Incorrect Correlation
    P052C/001324 - Camshaft Adj. Bank 2 Intake: Cold-Start Timing not Reached

    New chains, guides, adjusters and such installed. Everything except the chains were from the Audi dealer. Keeps getting cam/crank fault codes. Has gone back and checked the timing twice, everything lines up. Once I found out the chains didn't come from the dealer I used PL24 to see what chains it should take:

    • 06E109465
    • 06E109465AT
    • 06E109465BC
    • 06E109465AS


    It would seem that instead of 06E109465BC he got 06E109465AM. The 06E109465AM chain is for a 4.2L V8 engine. The chains are between the engine and trans so this isn't a quick fix.

    Next call 3 minutes later, same type of engine with the same type of problems... sooooo.... where did you get those parts from? He wasn't sure... so I have him the same part numbers and he is going to double check.

    I should note that the first person said the engine was clean, no oil sludge issues where as the second person implied the engine was a bit sludged up on top of the other issues is has.

    ST?ID=79759
    ST?ID=79764
    Jef
    Ross Tech Support Team, Alpha Squad
    Auto-Scan, learn it, love it, live it... then check the fuses.

  2. Likes jyoung8607, PetrolDave, Uwe, iichel liked this post
  3. #2
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    12,502
    Post Thanks / Like
    IDK Jef I think the AFT has verified that the lengths of these two chains are the same with coverage for both size engines & even others according to Febi, SWAG and IWIS

    I bet these cars are out of time.......... either way its a sad panda.........
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  4. #3
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    12,502
    Post Thanks / Like
    16400/P0016/000022 - Bank 1: Camshaft Position Sensor (G40) / Engine Speed Sensor (G28): Incorrect Correlation
    16396/P0012/000018 - Bank 1: Camshaft A (Intake): Advance Setpoint not Reached (Over-Retarded) <<<<<<<<<<<<<<<<<<<<<<<<
    P0017/000023 - Bank 1: CMP Sensor 3 (G300) / Engine Speed Sens (G28): Incorrect Correlation
    P052C/001324 - Camshaft Adj. Bank 2 Intake: Cold-Start Timing not Reached
    Just an FYI for anyone

    This could also be a factor of no or insufficient oil PSI volume/regulation.............
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •