Results 1 to 5 of 5

Thread: The parameter is incorrect

  1. #1
    Verified VCDS User
    Join Date
    Mar 2016
    Location
    Sweden
    Posts
    10
    Post Thanks / Like

    The parameter is incorrect

    I can't access any module with my vcds, all worked perfectly last week with the same set up. Out of no ware I get a VCDS error pop up message when I try to access any module stating "The parameter is incorrect" . Tested the connection in options and all shows ready and ok. Tried to restart the laptop and car but issue still remains.
    What is wrong?

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    18,429
    Post Thanks / Like
    Blog Entries
    1
    Can you post a screen-shot of this error please? It is not something I've seen or heard of before.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Verified VCDS User
    Join Date
    Mar 2016
    Location
    Sweden
    Posts
    10
    Post Thanks / Like
    I uninstalled VCDS and reinstalled it and now all is working again.
    I'm not using a clone of any kind by the way.

    I don't have the error messages anymore so I linked to one found on google.
    Same pop up but stated "VCDS" instead of "Virtual Disk Manager"

  4. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    18,429
    Post Thanks / Like
    Blog Entries
    1
    What interface? Your HEX-NET or your HEX+CAN?

    If HEX-NET, WiFi or USB?

    What version of Windows and what kind of computer?

    The string, "The parameter is incorrect" comes from the OS, not from VCDS...

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  5. #5
    Verified VCDS User
    Join Date
    Mar 2016
    Location
    Sweden
    Posts
    10
    Post Thanks / Like
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 17.8.1.0 (x64) HEX-NET CB: 0.4401.4

    Used above in USB mode and with below Laptop and Windows, hope this helps you in the future.

    Windows 7 Enterprise
    Service Pack 1

    Dell Latitude E7270

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •