Hello, firstly thank you to Mike west at Gendan ltd for his referral to this forum.
I am the owner of a 2012 Audi A7 3.0tdi sline.
I have purchased a 2018 nav update from audiupdates.com
I received a link on instructing me how to carry out the update using the SD cards supplied.
https://drive.google.com/file/d/0B-hm4J864FJKb0ZFQktGQTVsbHNlQ3BybkJSTUtQSzVmV3NR/view
In the guide it notes that if Bose is fitted ( which it is) it will need the parameters reset after the firmware/maps have been updated.
My question is , can Vcds perform this parameter reset?
I own both my A7 and the wife’s A1 and looking into purchasing the 3 vin Vcds. However my knowledge of its potential is lacking just now.
Thanks for any insight, Matt
I am the owner of a 2012 Audi A7 3.0tdi sline.
I have purchased a 2018 nav update from audiupdates.com
I received a link on instructing me how to carry out the update using the SD cards supplied.
https://drive.google.com/file/d/0B-hm4J864FJKb0ZFQktGQTVsbHNlQ3BybkJSTUtQSzVmV3NR/view
In the guide it notes that if Bose is fitted ( which it is) it will need the parameters reset after the firmware/maps have been updated.
My question is , can Vcds perform this parameter reset?
I own both my A7 and the wife’s A1 and looking into purchasing the 3 vin Vcds. However my knowledge of its potential is lacking just now.
Thanks for any insight, Matt