Results 1 to 4 of 4

Thread: MOTOR FOR FRONT WINDOW REGULATOR MISSING CALIBRATION

  1. #1
    Pirate
    Join Date
    Nov 2017
    Location
    TBD
    Posts
    2
    Post Thanks / Like

    Question MOTOR FOR FRONT WINDOW REGULATOR MISSING CALIBRATION

    Hello pals.

    Iím having this problem with the drivers windows, its seems that works forced and sometimes when the window gets to the top then instantainely go down and you need several tries to get it completely closed. I used the VAG-COM and this it what it says:

    1 Fault Found:
    66048 - Motor for Front Window Regulator
    B11EC 54 [008] - Missing Calibration / Basic Setting
    Confirmed - Tested Since Memory Clear

    Iíve look for information about it but i didnít find anything. Can someone help me with that please.

    My car is a Jetta GLI 2.0T 2013 MK6

    Thank you.

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    16,420
    Post Thanks / Like
    Blog Entries
    1
    Since you posted in the Reference Scans section, where is your Auto-Scan?

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. Likes The One liked this post
  4. #3
    Pirate
    Join Date
    Nov 2017
    Location
    TBD
    Posts
    2
    Post Thanks / Like
    IM SORRY HERE IS COMPLETE SCAN

    Code:
    Removed.  Data from a clone/pirate copy of VCDS is not welcome here.
    Last edited by Uwe; 11-28-2017 at 04:04 PM.

  5. #4
    Verified VCDS User
    Join Date
    Jul 2016
    Location
    Australia
    Posts
    50
    Post Thanks / Like
    This is the most easiest fix, but you're a dirty pirate that doesn't support the people that help you, so no help for you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •