Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: License status: not allowed - unlimited VINs

  1. #1
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    France
    Posts
    7
    Post Thanks / Like

    License status: not allowed - unlimited VINs

    Hi.

    After register my HEX-net i have this message: " License status: not allowed - unlimited VINs "

    I tried a re-registration but the answer is pending since yesterday.

    Initially my problem was: "Unlicensed version" in program but in options i have "interface registered" to my name.

    I use VCDS FRM 17.8.0 and fw is 0.254 (CB: 0.4401)

    What can i do?

    Thx for all and sorry for my bad english.

  2. #2
    Ross-Tech Employee Eric's Avatar
    Join Date
    Jan 2014
    Posts
    2,008
    Post Thanks / Like
    Well you bought the interface from a german distributor, so it is not going to be activated for the french version. You need to use either the german or the english version.
    You ain't metal till you got a clutch pedal

  3. Likes Katoom33, Uwe liked this post
  4. #3
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    France
    Posts
    7
    Post Thanks / Like
    Ok thx very well ! No issue for install french version?

  5. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    15,269
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Katoom33 View Post
    What can i do?
    What reseller did you buy it from? We know it came from a German distributor, but we don't know the next level down in the chain.

    -Uwe-
    Ceterum censeo, delenda est Daesh.

  6. Likes Katoom33 liked this post
  7. #5
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    France
    Posts
    7
    Post Thanks / Like
    I buy it on EBAY, it's a demonstration interface without full package (only USB key, USB cable and interface). It come from www.vcdspro.de. Thank you very much for your interest

  8. Likes Uwe liked this post
  9. #6
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    France
    Posts
    7
    Post Thanks / Like
    Ok good, it work in EN version. But the problem is that customer reports will be in English ... lol

  10. Likes Uwe, Eric liked this post
  11. #7
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    15,269
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Katoom33 View Post
    I buy it on EBAY, it's a demonstration interface without full package (only USB key, USB cable and interface). It come from www.vcdspro.de. Thank you very much for your interest
    Is the eBay listing still available? If it is, I would like to see it.

    -Uwe-
    Ceterum censeo, delenda est Daesh.

  12. #8
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    France
    Posts
    7
    Post Thanks / Like

  13. Likes Uwe liked this post
  14. #9
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    France
    Posts
    7
    Post Thanks / Like

  15. #10
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    15,269
    Post Thanks / Like
    Blog Entries
    1
    Well, since the "Caractéristiques de l'objet" are all in German, I'm not going to get too upset over this.

    -Uwe-
    Ceterum censeo, delenda est Daesh.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •