Results 1 to 3 of 3

Thread: Flashing Lights ABS System CODING B6 A4 Incorrect Coding 01044 Issues

  1. #1
    Verified VCDS User
    Join Date
    Jan 2017
    Location
    USA
    Posts
    15
    Post Thanks / Like

    Flashing Lights ABS System CODING B6 A4 Incorrect Coding 01044 Issues

    Here is one that is causing me some frustration. Car came in with wheel speed sensor faults at 3 of the 4 wheels. ABS shows wheel speed but fault continues to set. So replaced the ABS Module with a used module as a new one was unavailable at this time. Part numbers of the original one was
    8E0 614 517 H used one is 8E0 614 517 A. It seems that those numbers cross reference but im not 100% sure. I extracted the coding from the original module and put it into the new/used one. I completes and the main screen show new coding and WSC. I login to do the steering angle calibration and Parameter shows locked. I exited out of that and cycled the Key and Still have flashing lights. I went back into ABS and the Coding and WSC now Show 00000, 00000. I have done this process about 10 times now and have end with the same result. I attempted to install the original module and it now is doing the same thing as the used one.
    Am I missing something?
    Thanks for Any input.






    Code:
    Thursday,12,October,2017,13:28:03:64595
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 17.8.0.1 (x64)
    Data version: 20170721 DS276.2
    www.Ross-Tech.com
    
    
    VIN: WAULC68E53A220169   License Plate: 
    Mileage: 259660km-161345mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 8E (8E - Audi A4/S4/RS4 B6/B7 (2001 > 2008))
    Scan: 01 02 03 08 09 0F 11 15 16 17 18 25 36 37 45 46 55 56 57 65
              67 69 75 76 77
     
    VIN: WAULC68E53A220169   Mileage: 259660km-161345miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 06B-909-518-AMB.lbl
       Part No SW: 8E0 909 518 AF    HW: 8E0 909 018 A
       Component: 1.8L R4/5VT     G   0002  
       Coding: 0016751
       Shop #: WSC 63351 000 00000
       VCID: 74EDD1F614477CE69E-50E6
    
    No fault code found.
    Readiness: 0110 1101
    
    -------------------------------------------------------------------------------
    Address 02: Auto Trans        Labels: 01V-927-156.lbl
       Part No: 8E0 927 156 P
       Component: AG5 01V 1.8l5VT USA 0910  
       Coding: 0001002
       Shop #: WSC 63351 000 00000
       VCID: 3B7F3ACA7999F39E9F-50E6
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 8E0-614-517.lbl
       Part No: 8E0 614 517 A
       Component: ABS/ESP allrad      4529  
       Coding: 00000
       Shop #: WSC 00000  
       VCID: 2649FBBEC21B5E76D0-508E
    
    2 Faults Found:
    01044 - Control Module Incorrectly Coded 
                35-00 -  - 
    00778 - Steering Angle Sensor (G85) 
                66-10 - Not Matched - Intermittent
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 8E0-820-043.lbl
       Part No: 8E0 820 043 L
       Component:   A4 Klimaautomat   1116  
       Coding: 00000
       Shop #: WSC 63351  
       VCID: 2A510F8ED6037A16F4-50E6
    
    2 Faults Found:
    00474 - Control Module for Immobilizer 
                49-10 - No Communications - Intermittent
    00474 - Control Module for Immobilizer 
                27-10 - Implausible Signal - Intermittent
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels: 8E0-907-279-8E2.lbl
       Part No: 8E0 907 279 F
       Component: int. Lastmodul  USA 0617  
       Coding: 00003
       Shop #: WSC 00000  
       VCID: 356B2CF20FBD25EE69-4A9C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 8E0-959-655-84.lbl
       Part No: 8E0 959 655 C
       Component: Airbag 8.4EP        2000  
       Coding: 0010607
       Shop #: WSC 63351 000 00000
       VCID: 377726FA45B1D7FE7B-50C8
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel        Labels: 8E0-953-549.lbl
       Part No: 8E0 953 549 L
       Component: Lenksáulenmodul     0308  
       Coding: 00041
       Shop #: WSC 63351  
       VCID: 3C7D39D62C97F4A696-4A9C
    
    1 Fault Found:
    00474 - Control Module for Immobilizer 
                49-10 - No Communications - Intermittent
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 8E0-920-9xx-8E2.lbl
       Part No: 8E0 920 950 L
       Component: KOMBI+WEGFAHRS. RB4 D36  
       Coding: 03200
       Shop #: WSC 40327  
       VCID: 326117EEFED332D64C-50E6
       WAULC68E53A220169     AUZ6Z0B0314504
    
    2 Faults Found:
    01176 - Key 
                07-10 - Signal too Low - Intermittent
    01316 - ABS Control Module 
                49-10 - No Communications - Intermittent
    
    -------------------------------------------------------------------------------
    Address 45: Inter. Monitor        Labels: 8E0-951-177.lbl
       Part No: 8E0 951 177 
       Component: Innenraumueberw.   0604  
       Coding: 00001
       Shop #: WSC 00000  
       VCID: 6BDFCA8A1979A31E4F-50C8
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels:. 8E0-959-433-MAX.clb
       Part No: 8E0 959 433 BB
       Component: Komfortgerát T7B    1311  
       Coding: 11788
       Shop #: WSC 63351  
       VCID: 72E1D7EE3E5372D68C-4A9C
    
       Subsystem 1 - Part No: 8E1959801
       Component: Tőrsteuer.FS BRM 0002  
    
       Subsystem 2 - Part No: 8E1959802E
       Component: Tőrsteuer.BF BRM 0002  
    
       Subsystem 3 - Part No: 8E0959801A
       Component: Tőrsteuer.HL BRM 0002  
    
       Subsystem 4 - Part No: 8E0959802A
       Component: Tőrsteuer.HR BRM 0002  
    
    11 Faults Found:
    01370 - Alarm triggered by Interior Monitoring 
                35-00 -  - 
    00962 - Alarm via. Tilt Sensor 
                35-00 -  - 
    01368 - Alarm triggered by Luggage Compartment Switch 
                35-00 -  - 
    01374 - Alarm triggered by Terminal 15 
                35-00 -  - 
    01371 - Alarm triggered by Door Contact Switch; Driver's Side 
                35-00 -  - 
    01572 - Alarm triggered by Door Contact Switch; Passenger Side 
                35-00 -  - 
    01574 - Alarm triggered by Door Contact Switch; Rear Right 
                35-00 -  - 
    01573 - Alarm triggered by Door Contact Switch; Rear Left 
                35-00 -  - 
    01366 - Opened Due to Crash Signal 
                35-00 -  - 
    00956 - Key 2 
                35-10 -  -  - Intermittent
    01331 - Door Control Module; Driver Side (J386) 
                80-00 - Single-Wire Operation
    
    -------------------------------------------------------------------------------
    Address 56: Radio        Labels: 8E0-035-1xx-56.lbl
       Part No: 8E0 035 195 F
       Component: symphony II NP2    0051   
       Coding: 01201
       Shop #: WSC 03326  
       VCID: 2A510F8ED6037A16F4-4E42
    
    No fault code found.
    
    End-------------------------(Elapsed Time: 05:29)--------------------------

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    15,522
    Post Thanks / Like
    Blog Entries
    1
    Have you done Login, Coding, and Steering Angle Sensor calibration all in the same session?

    See Wiki page here.

    -Uwe-
    Ceterum censeo, delenda est Daesh.

  3. Likes Jetta ,97 liked this post
  4. #3
    Verified VCDS User
    Join Date
    Jan 2017
    Location
    USA
    Posts
    15
    Post Thanks / Like
    Thanks, I missed the steering wheel calibration step. I found 2 issues in the process...
    1. The Coding, Login, Steering cal needs to be done as a complete process without starting the vehicle or Exiting the module.
    2. Last step turn the steering wheel 90 deg each way and back to center. After that the Basic setting channel for steering angle went from LOCKED to OK

    Simple stuff I just missed it in the process Thanks again

  5. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •