Hello,
I want to retrofit my Audi A4 2012 by installing a AMI.
So I installed the AMI to my unit replacing the existing AUX and made the respective changes in the Green menu in order to replace the AUX with AMI option.
When I plug for example an USB Flash drive its indicator is lighting but on my MMI screen is shown "AMI - No device connected".
Could you please help me with the respective coding in order to activate the AMI.
This is the respective Auto Scan:
Best regards,
Zahary
I want to retrofit my Audi A4 2012 by installing a AMI.
So I installed the AMI to my unit replacing the existing AUX and made the respective changes in the Green menu in order to replace the AUX with AMI option.
When I plug for example an USB Flash drive its indicator is lighting but on my MMI screen is shown "AMI - No device connected".
Could you please help me with the respective coding in order to activate the AMI.
This is the respective Auto Scan:
Code:
Removed. Data from pirate copies of VCDS is not welcome here.
Best regards,
Zahary
Last edited by a moderator: