Hello.
My sunroof all of a sudden decided to stop operating and close position now brings it to tilt. VCDS scan shows the following.
Anyone knows how to reset/calibrate it in VCDS?
My sunroof all of a sudden decided to stop operating and close position now brings it to tilt. VCDS scan shows the following.
Code:
Address CA: Sunroof (J245) Labels:* None
Part No SW: 4M0 907 594 A HW: 4M0 907 594
Component: SAD_STG_1 012 0003
Coding: 208000000000
ASAM Dataset: EV_SunRoofCONTIAU736 004008
ROD: EV_SunRoofCONTIAU736_004_VW37.rod
3 Faults Found:
0264 - Sunroof
B1543 54 [009] - Missing Calibration / Basic Setting
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 5
Fault Frequency: 1
Reset counter: 62
Mileage: 9564 km
Date: 2017.09.29
Time: 16:05:58
Sunroof-Position: 0 %
Sunroof-Direction of movement: Not moving
Sunroof-Norming: not normed
Sunroof-Position: Slid.position
Sunroof-Excessive temperature protection: not active
Sunroof-Reversing: not active
Sunroof-Adaption depth: 100 %
0265 - Motor for Sunroof
B1570 F0 [008] - Over-Temp Protection Active
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 9
Reset counter: 105
Mileage: 9582 km
Date: 2017.09.30
Time: 08:04:55
Temperatures-Control module: -50.00 °C
Temperatures-Outside temperature: filtered: 6.50 °C
Temperatures-Motor for sunroof: 110.00 °C
Temperatures-Roof shade motor: not installed
0325 - No Vehicle Type Coded
B1694 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 5
Fault Frequency: 1
Reset counter: 62
Mileage: 9564 km
Date: 2017.09.29
Time: 16:05:58
Anyone knows how to reset/calibrate it in VCDS?