Page 32 of 34 FirstFirst ... 223031323334 LastLast
Results 311 to 320 of 332

Thread: Current Versions

  1. #311
    Verified VCDS User
    Join Date
    Jun 2015
    Location
    USA
    Posts
    7
    Post Thanks / Like
    Thank you Benevolent Dictator

  2. #312
    Ross-Tech Employee
    Join Date
    Jan 2014
    Posts
    609
    Post Thanks / Like
    Bump for CB V0.4409
    * Fix for data loading/rod redirect issues
    * Fix for UDS mv drops with grouped requests + turbo mode
    * Fix for Immo3 extra info parsing

  3. Likes Uwe liked this post
  4. #313
    Verified VCDS User hans j's Avatar
    Join Date
    Mar 2014
    Location
    Utah
    Posts
    41
    Post Thanks / Like
    Mine keeps telling my I'm not up to date, but the updating software says I am up to date. I've been having to use older versions to make it work.

    VCDS 17.12 says I'm at:

    CB 0.4409.4
    FW 0.254
    WiFi 310C
    and says firmware update required.

    Firmware software says:
    CB 0.4409
    FW 0.254
    CFB 0.10
    BL 0.28
    DS 00000050

  5. #314
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    18,426
    Post Thanks / Like
    Blog Entries
    1
    You'll need to flip your interface onto the Beta update channel using VCIConfig, as described on the Beta Page in the Release Notes section:
    If you are using a HEX-NET or HEX-V2 interface, you must set the update channel for your interface to "Beta" and update it before you can use this version of VCDS.


    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  6. Likes hans j, Shaun, Boki Ar liked this post
  7. #315
    Ross-Tech Employee
    Join Date
    Jan 2014
    Posts
    609
    Post Thanks / Like
    You need to switch your interface to the beta channel to get the latest testing firmware that goes with the beta version of VCDS.

    In VCIConfig, go to [Advanced] -> Update channel [Beta] -> [Change Channel]

    Then check for updates again.

    EDIT: As Uwe showed above, with the picture.

  8. Likes Uwe, Boki Ar liked this post
  9. #316
    Verified VCDS User hans j's Avatar
    Join Date
    Mar 2014
    Location
    Utah
    Posts
    41
    Post Thanks / Like
    That worked! Thanks again.

  10. Likes Shaun, Uwe, Boki Ar liked this post
  11. #317
    Ross-Tech Employee
    Join Date
    Jan 2014
    Posts
    609
    Post Thanks / Like
    Bump for CB V0.4411
    * Support for configurable CharInt from VCDS
    * Test fix for comms with certain CAN modules

  12. Likes Uwe, Eric, PetrolDave liked this post
  13. #318
    Verified VCDS User
    Join Date
    Apr 2014
    Location
    UK
    Posts
    25
    Post Thanks / Like

    Channel set

    Quote Originally Posted by Shaun View Post
    Bump for CB V0.4411
    * Support for configurable CharInt from VCDS
    * Test fix for comms with certain CAN modules
    I have your Beta version of VCDS on my desktop and also the release, should I set the channel for the HexNet to beta in the beta version only, or do I also set the beta channel in the release version?

  14. #319
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    18,426
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Gary View Post
    I have your Beta version of VCDS on my desktop and also the release, should I set the channel for the HexNet to beta in the beta version only, or do I also set the beta channel in the release version?
    It doesn't matter which one you use. That setting tells the server which channel you're on; it's not a local setting.

    BTW, since we now have a Release 18.1.0, Beta 17.12 is deprecated.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  15. Likes Eric liked this post
  16. #320
    Verified VCDS User romad's Avatar
    Join Date
    Feb 2014
    Location
    Oroville, California People's Republic
    Posts
    163
    Post Thanks / Like
    I just updated my Hex-Net but all I see on the "About" is this:

    CodeBlock V0.4411
    FW version: 0.254
    Dataset: 00000050

    No CFB or BL
    No 10000050 dataset

    But I'm told that my Hex-Net is up to date. Where do I find the CFB & BL info?

    I'm viewing this via my Firefox 52ESR web browser on my iMac

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •