Retrofitting bi-xenon Amarok 2013

   #1  

Rikardhalen

Verified VCDS User
Verified
Joined
Jul 15, 2017
Messages
13
Reaction score
2
Location
Sweden
VCDS Serial number
C?ID=36446 (NRRT)
Hi
I have installed Oem xenon in my Rok after some instructions I have found from Eballs28 on this forum.

This is how I want the lights to operate:
Led Drl have to be on at the same time as the rear parking lights (Swedish rules)
When it's getting dark outside the Led Drl should be dimming when the headlight comes on.

My -13 have all options available at the time inc Nav Rns510
And my BCM module have the number 7H0 937 090.

With no coding done everything worked as before with the halogen lights except for the Led Drl.

I have been installing new wires from the BCM T73b/5 and 6 to each headlight connector 10.

Now to the coding I will need some help with that as the coding instructions from Eballs28 doesn't seem to work for my car.

This is what worked for Eballs28

Central electric module 9

Byte11, bit0 needs to be a 1
Byte12, bit0 needs to be a 1
Byte22, bit4 needs to be a 1
Byte18, needs to have a hex value of 67

One problem for me is that I cant see all the "byte" checkboxes In my vcds

When I did the complete Eballs28 coding nothing worked and the xenon was strobing/flashing.

But when I did Byte22 coding alone and nothing else the Led Drl started working
But it's no parking light in the rear.

If I go to byte12 and do bit 0 to 1 the Led Drl comes off and the rear parking lights starts working instead.


When I cover the light sensor the LED Drl comes off and the Xenon headlight starts working instead . When the Led is suppose to be dimming.

My Pc crashed today and after a reinstall of windows I can't get explorer to access the internet so I had to take a picture of the coding with my phone and post this from my iPad I hope that's ok

Coding pic.
http://forumbilder.se/G8VVP/img-3971
http://forumbilder.se/G8VVP/img-3972
 
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
   #3  

marcello032

New Member
Joined
Jan 4, 2018
Messages
2
Reaction score
1
Location
Ecuador
Hi


I bought the bi-xenon DRLs for my Amarok'16 2HBB3A TDI 2.0.

I went to my local dealer to install them but we are having some issues.


First of all I follow all the instructions I could find about the installation, this means I connected the t73b pin 5 to the left light and the t73b pin 6 to the right light, both on pin 10.


n 5 Mass

n 10 BCM

n 6 Low

n 8 high

n 9 Turn

n 4 Position

Also the configuration on my Comfort Module 09 is:


Byte 11 bit 0 to 1 to activate high beam shutter
Byte 18 changed to 67 or 65 if using LED number plate lights
Byte 22 bit 4 to 1 to enable LED module for DRL and Parking Lights.

Doing this, when the motor is running the led DRL's start flashing as strobe lights, the DRL doesn't work (daylight), and when I turn on the middle lights the LED DRL DIMs which it should do but still flashes all the time. I also have the light bulb fault on my dashboard.

Could you please help me, do you have any guide, wiring diagram and instructions including codification, on what I should do in order for this to work properly?, what can I do to fix this.
 
   #5  

marcello032

New Member
Joined
Jan 4, 2018
Messages
2
Reaction score
1
Location
Ecuador
Hi iichel, sorry for the late response, I had an accident earlier this year and still haven't been able to fit the bi-xenon headlights on my AMAROK, once the car is ready I will continue with the retrofit as nothing has changed so far.
Thanks in advance for your help.
 
   #6  

Aronclb

New Member
Joined
Mar 27, 2018
Messages
8
Reaction score
0
Location
Romania
Code:
Tuesday,29,May,2018,12:17:03:11999
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
VCDS Version: 18.2.1.2
Data version: 20180518 DS287.1
www.Ross-Tech.com


VIN: WV1ZZZ2HZB8062680   License Plate: XXX
Mileage: 173470km-107789mi   Repair Order: 1234



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 2H-VN81 (6N0)
Scan: 01 03 04 08 09 15 17 19 25 32

VIN: WV1ZZZ2HZB8062680   Mileage: 173470km-107789miles

01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: Malfunction 0010
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
32-Differential Locks -- Status: Malfunction 0010
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CDCA)       Labels:. 03L-906-022-CAA.clb
   Part No SW: 03L 906 019 FC    HW: 03L 907 309 K
   Component: R4 2.0l BTD   H40 9978  
   Revision: 26H40---    Serial number: 00000000000000
   Coding: 01194012232600080000
   Shop #: WSC 28315 001 1048576
   ASAM Dataset: EV_ECM20BTD01103L906019FC 004006
   ROD: EV_ECM20BTD01103L906019FC_004.rod
   VCID: 71E9EE97A087C5CCD8-8024

8 Faults Found:
4332 - Check Coding of ECUs on Powertrain Data Bus 
          P1647 00 [036] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 10
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 18 °C
                    Intake air temperature: 21 °C
                    Ambient air pressure: 980 mbar
                    Voltage terminal 30: 11.800 V
                    Unlearning counter according OBD: 40
                    ACC target acceleration: 0.000 m/s²
                    ACC control module received status-Bits 0-7: 6
                    Status of ACC/CCS acceleration interface-Bits 0-7: 0
                    Acceleration: 0.000 m/s²
                    Engine status: COENG_READY
                    Engine status-Test_Program_Co Eng st COMPU VERB UBYTE: 1

4481 - Cruise Control Switch (E45) 
          P0568 00 [044] - Implausible Signal
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 4
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 26 °C
                    Intake air temperature: 20 °C
                    Ambient air pressure: 970 mbar
                    Voltage terminal 30: 13.200 V
                    Unlearning counter according OBD: 40
                    Cruise Control System (CCS): switch position-Bits 0-7: 129
                    Cruise Control System (CCS): status-Bits 0-7: 232
                    Cruise control switch-off: irreversible-Bits 0-7: 255
                    Cruise control switch-off: reversible-Bits 0-7: 255
                    Cruise Control System: specified speed: 0.00 km/h
                    Engine control module reset status-Bits 0-7: 0
                    Engine control module reset status-Bits 0-7: 2
                    Cruise control switch-off: irreversible w. brake intervention-Bits 0-7: 0

4482 - Function Restriction due to Implausible Message(s) 
          U1112 00 [044] - -
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 15
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 26 °C
                    Intake air temperature: 20 °C
                    Ambient air pressure: 970 mbar
                    Voltage terminal 30: 13.200 V
                    Unlearning counter according OBD: 40
                    Cruise Control System (CCS): switch position-Bits 0-7: 193
                    Cruise Control System (CCS): status-Bits 0-7: 232
                    Cruise control switch-off: irreversible-Bits 0-7: 255
                    Cruise control switch-off: reversible-Bits 0-7: 255
                    Cruise Control System: specified speed: 0.00 km/h
                    Engine control module reset status-Bits 0-7: 0
                    Engine control module reset status-Bits 0-7: 2
                    Cruise control switch-off: irreversible w. brake intervention-Bits 0-7: 0

4483 - Function Restriction due to Faults in Other Modules 
          U1113 00 [044] - -
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 8
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 22 °C
                    Intake air temperature: 23 °C
                    Ambient air pressure: 970 mbar
                    Voltage terminal 30: 14.240 V
                    Unlearning counter according OBD: 40
                    Cruise Control System (CCS): switch position-Bits 0-7: 193
                    Cruise Control System (CCS): status-Bits 0-7: 232
                    Cruise control switch-off: irreversible-Bits 0-7: 255
                    Cruise control switch-off: reversible-Bits 0-7: 255
                    Cruise Control System: specified speed: 0.00 km/h
                    Engine control module reset status-Bits 0-7: 0
                    Engine control module reset status-Bits 0-7: 2
                    Cruise control switch-off: irreversible w. brake intervention-Bits 0-7: 0

4708 - No Communications with HVAC Control Module (J301) 
          U0164 00 [036] - -
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 5
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 21 °C
                    Intake air temperature: 22 °C
                    Ambient air pressure: 980 mbar
                    Voltage terminal 30: 12.600 V
                    Unlearning counter according OBD: 40
                    Limitation: accelerator pedal: 0.0 Nm
                    CAN status - engine control module-Bits 0-7: 0
                    Cruise Control System (CCS): status-Bits 0-7: 200
                    CAN status - transmission control module-Bits 0-7: 0
                    CAN status - brake control module 1-Bits 0-7: 0
                    CAN status - brake control module 2-Bits 0-7: 0
                    selected gear-Bits 0-7: 0

4717 - Body Control Module (Central Electric) 
          U0140 00 [036] - No Communications
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 5
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 21 °C
                    Intake air temperature: 22 °C
                    Ambient air pressure: 980 mbar
                    Voltage terminal 30: 12.600 V
                    Unlearning counter according OBD: 40
                    Limitation: accelerator pedal: 0.0 Nm
                    CAN status - engine control module-Bits 0-7: 0
                    Cruise Control System (CCS): status-Bits 0-7: 232
                    CAN status - transmission control module-Bits 0-7: 0
                    CAN status - brake control module 1-Bits 0-7: 0
                    CAN status - brake control module 2-Bits 0-7: 0
                    selected gear-Bits 0-7: 0

4719 - No Communication with Diagnostic Gateway 
          U0146 00 [036] - -
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 4
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 21 °C
                    Intake air temperature: 22 °C
                    Ambient air pressure: 980 mbar
                    Voltage terminal 30: 12.600 V
                    Unlearning counter according OBD: 40
                    Limitation: accelerator pedal: 0.0 Nm
                    CAN status - engine control module-Bits 0-7: 0
                    Cruise Control System (CCS): status-Bits 0-7: 201
                    CAN status - transmission control module-Bits 0-7: 0
                    CAN status - brake control module 1-Bits 0-7: 0
                    CAN status - brake control module 2-Bits 0-7: 0
                    selected gear-Bits 0-7: 0

4629 - ECM Power Relay Load Circuit 
          P068A 00 [040] - Opens Too Early
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: -40 °C
                    Intake air temperature: -40 °C
                    Ambient air pressure: 0 mbar
                    Voltage terminal 30: 0.000 V
                    Unlearning counter according OBD: 40
                    Accelerator pedal travel: 0.00 %
                    Starter control: Interlock- or P/N-signal-Bits 0-7: 0
                    Engine status: COENG_STANDBY
                    Engine status-Test_Program_Co Eng st COMPU VERB UBYTE: 0

Readiness: 1010 0000

-------------------------------------------------------------------------------
Address 03: ABS Brakes (-----)       Labels:. 2H0-907-37x-ESP.clb
   Part No SW: 2H0 907 379 G    HW: 2H0 907 379 D
   Component: ESP MK25A XT  H44 0106  
   Revision: 00H44001    
   Coding: C07324B69A9A039724A859AB6F5010
   Shop #: WSC 07456 790 49164
   VCID: 346727839715B0E4F3-8060

3 Faults Found:
01317 - Control Module in Instrument Cluster (J285) 
            000 -  -  - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 0
                    Time Indication: 0

             Freeze Frame:
                    Count: 32768
                    Count: 4097
                    Count: 8280
                    Count: 514

03095 - Diagnostic interface for databus (J533) implausible messa.: 
            000 -  -  - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 0
                    Time Indication: 0

             Freeze Frame:
                    Count: 32768
                    Count: 4097
                    Count: 8257
                    Count: 514

01299 - Diagnostic Interface for Data Bus (J533) 
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 0
                    Time Indication: 0

             Freeze Frame:
                    Count: 32832
                    Count: 4097
                    Count: 8233
                    Count: 514


-------------------------------------------------------------------------------
Address 08: Auto HVAC
Cannot be reached

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 7H0-937-08x-09.clb
   Part No SW: 7H0 937 090 D    HW: 7H0 937 090 
   Component: BCM PQ25 Max4 H78 0725  
   Revision: B9078001    Serial number: 9000 219150127
   Coding: 350006380C211000003008312ECB96DD0F80664E60003040300000030003
   Shop #: WSC 12345 123 12345
   VCID: 2F6D28EF7E33933C8E-807A

   Subsystem 1 - Part No SW: 6R0 959 801 M    HW: 6R0 959 801 M  Labels: 6R0-959-801.CLB
   Component: J386__TSG_FT  002 3321 
   Serial number: --------------------
   Coding: 100000

   Subsystem 2 - Part No SW: 6R0 959 802 P    HW: 6R0 959 802 P  Labels: 6R0-959-802.CLB
   Component: J387__TSG_BT  002 3321 
   Serial number: --------------------
   Coding: 100000

   Subsystem 3 - Part No: 1K8 951 605 B
   Component: LIN BACKUP HO  H11 9005 
   Coding: 000000

   Subsystem 4 - Part No SW: 6R0 959 811 D    HW: 6R0 959 811 D
   Component: J388__TSG_HL  002 3321 
   Serial number: --------------------
   Coding: 100000

   Subsystem 5 - Part No SW: 6R0 959 812 D    HW: 6R0 959 812 D
   Component: J389__TSG_HR  002 3321 
   Serial number: --------------------
   Coding: 100000

2 Faults Found:
01044 - Control Module Incorrectly Coded 
            000 -  - 
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

01504 - Bulb for License-Plate Light (X) 
            010 - Open or Short to Plus
             Freeze Frame:
                    Fault Status: 01101010
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 0
                    Time Indication: 0


-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
   Part No SW: 2H0 959 655 B    HW: 2H0 959 655 B
   Component: VW10Airbag00B H06 0013  
   Revision: --------    Serial number: 003HN002N3WH
   Coding: 000000000000000000000000000000003042
   Shop #: WSC 07446 790 50316
   ASAM Dataset: EV_AirbaVW10BPAVN750 A01026
   ROD: EV_AirbaVW10BPAVN750_VW12.rod
   VCID: 3365249F9A1BB7DCEA-8066

   Crash sensor for side airbag: driver side: 
   Serial number: 3495RRB40590BTBE4GV5

   Crash sensor for side airbag: front passenger side: 
   Serial number: 3505RRB40590BTBE7OT6

   Crash sensor for front airbag: driver side: 
   Serial number: 3555YRB405F060GK4GPT

   Crash sensor for front airbag: front passenger side: 
   Serial number: 3565YRB405H060GKP98T

2 Faults Found:
9437211 - Igniter for Driver's Airbag 
          B1000 1B [137] - Resistance Too High
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00

12666368 - Databus 
          U1122 00 [008] - Implausible Message
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 3
                    Reset counter: 40


-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
   Part No SW: 2H0 920 863 A    HW: 2H0 920 863 A
   Component: KOMBI         H05 0304  
   Serial number: 00000000000000
   Coding: 150A00
   Shop #: WSC 07456 790 50316
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04086
   ROD: EV_Kombi_UDS_VDD_RM09_004_VW32.rod
   VCID: 275DC0CF5EC3CB7C46-8072

2 Faults Found:
12664832 - Function Restricted due to Missing Message(s) 
          U1111 00 [009] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 0

13635840 - Supply voltage 
          U1011 00 [008] - Voltage too Low
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 40
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00


-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 6N0-909-901-6R.clb
   Part No SW: 6N0 909 901     HW: 7H0 937 090 
   Component: GW-K-CAN TP20 H78 0725  
   Revision: B9078001    
   Coding: 742200
   Shop #: WSC 12345 123 12345
   VCID: 70EFEB93A38DCCC4D7-8024

2 Faults Found:
01336 - Company Data Bus for Comfort System 
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 1
                    Fault Frequency: 21
                    Reset counter: 40
                    Time Indication: 0

00381 - Databus Instrument Cluster 
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100100
                    Fault Priority: 1
                    Fault Frequency: 254
                    Reset counter: 0
                    Time Indication: 0


-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H05 0304  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03008
   ROD: EV_Immo_UDS_VDD_RM09.rod
   VCID: 6ADBF9FB8D51361499-803E

No fault code found.

-------------------------------------------------------------------------------
Address 32: Differential Locks (J647)       Labels:* 2H0-927-771.clb
   Part No SW: 2H0 927 771     HW: 2H0 927 771 
   Component: Quersperre    H04 0014  
   Revision: 11001001    Serial number: 4DG 18.11.10 00
   Coding: 000001
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_QuersUDSAAMVN817 A01005
   ROD: EV_QuersUDSAAMVN817.rod
   VCID: 6BD5FCFF82AB2F1CE2-803E

1 Fault Found:
12666368 - Function Restricted due to Missing Message(s) 
          U1111 00 [008] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 1
                    Fault Frequency: 4
                    Reset counter: 40
                    Mileage: 0 km
                    Date: 2000.00.00
                    Time: 00:00:00

                    Vehicle speed: 0 km/h
                    Engine speed: 0.00 /min
                    Voltage terminal 30: 12.4 V
                    Voltage at sensor: 1.1 V
                    Actuator: coil current: 0.0 A


End-------------------------(Elapsed Time: 03:54)--------------------------
 
Last edited by a moderator:
   #7  

Aronclb

New Member
Joined
Mar 27, 2018
Messages
8
Reaction score
0
Location
Romania
I have the auto scan on my car
i have the daylight running but when it goes to turn on the lights the drl stops working
 
   #9  

Aronclb

New Member
Joined
Mar 27, 2018
Messages
8
Reaction score
0
Location
Romania
@iichel if you can help me, i am in the service with the car
 
   #10  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
7,887
Reaction score
7,762
Location
Westbury, UK
VCDS Serial number
C?ID=1423
I have the auto scan on my car
i have the daylight running but when it goes to turn on the lights the drl stops working
Do you mean the DRLs turn off when the other lights turn on?

If you do then that is normal behaviour - because when it's dark enough for the other lights to be on then there is no need for the DRLs to be on (as it's no longer Daylight!).
 
   #11  

Aronclb

New Member
Joined
Mar 27, 2018
Messages
8
Reaction score
0
Location
Romania
Normaly the drl lowers the intensity when the ligjts are on, for me stops at all.
 
   #12  

iichel

Verified VCDS User
Verified
Joined
Aug 10, 2016
Messages
3,756
Reaction score
4,172
Location
Netherlands, eastern part
VCDS Serial number
C?ID=284912
Are you sure your BCM supports bi-xenon?
Are you mounting bi-xenon with LED DRL or with a halogen bulb?
 
   #13  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
7,887
Reaction score
7,762
Location
Westbury, UK
VCDS Serial number
C?ID=1423
Normaly the drl lowers the intensity when the ligjts are on, for me stops at all.
Is that what happened on your car before?

On many cars the DRLs turn off, not dim - both behaviours are allowed and manufacturers can choose which to implement.
 
Back
Top