TPMS Indirect sets low PSI DTC & Won't clear after PSI verified w- VCDS/VAS Solution!

   #1  

Jack@European_Parts

Gone But Not Forgotten
Professional VCDS User
Joined
Jan 29, 2014
Messages
21,923
Reaction score
9,308
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
TPMS Indirect sets low PSI DTC & Won't clear after PSI verified w- VCDS/VAS Solution!

Okay I had a 2011 CAEB Q5 slushy today, installed four new tires, steering rack, & control arms; replaced due to collision damage.
There was concern for wheel bearing and ABS Reluctor.
Went for quality check road test with customer during redelivery. TPMS light came on after 5 miles and DTC in 0x03.
Clear & would come back on ....WTF!
Tried key cycle and same crap, even after sleep period with alarm set.
Recoding the model after security access was only solution to default the controller.
 
Back
Top