Audi A8 2004 parking brake not work

hi i got this Audi A8 the brake park its not work do i need to do the auto scan or only this will help

Sunday,02,July,2017,14:12:37:20576
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 17.1.3.0 (x64) HEX-NET CB: 0.4336.4
Data version: 20170320 DS267.7
www.Ross-Tech.com




Address 53: Parking Brake Labels: 4E0-910-801.clb
Control Module Part Number: 4E0 910 801 C HW: 4E0 907 801 A
Component and/or Version: EPB A32C0220 H02 0220
Software Coding: 0000532
Work Shop Code: WSC 02136 444 53504
VCID: 9F0EA4D84EED3CB970-FFFE
3 Faults Found:

02435 - Supply Voltage for Control Module for Right Channel
009 - Open or Short to Ground - MIL ON
Freeze Frame:
Fault Status: 11111001
Fault Priority: 1
Fault Frequency: 1
Reset counter: 87
Time Indication: 0

Freeze Frame:
Voltage: 11.59 V
Count: 113

02443 - Control Head
012 - Electrical Fault in Circuit - MIL ON
Freeze Frame:
Fault Status: 11101100
Fault Priority: 2
Fault Frequency: 17
Reset counter: 87
Time Indication: 0

Freeze Frame:
Voltage: 11.59 V
Count: 40

02596 - Rear Brake Pads Worn
008 - Implausible Signal
Freeze Frame:
Fault Status: 01111000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 87
Time Indication: 0

Freeze Frame:
Voltage: 11.59 V
Count: 61

You need to post an Auto-Scan...

Been to the Wiki?

http://wiki.ross-tech.com/wiki/index.php/02435
http://wiki.ross-tech.com/wiki/index.php/02443
http://wiki.ross-tech.com/wiki/index.php/02596

-Uwe-