Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: 2002 A4 CCM issues

  1. #21
    Verified VCDS User
    Join Date
    Jun 2017
    Location
    Canada
    Posts
    12
    Post Thanks / Like
    I just noticed those now, I've been so caught up with my ccm causing issues that I didn't want to start digging around with other components until I fix the main issue concerning me. I will toss it on a trickle charger and see how it does. As for the battery it has no date on it, says Audi original and has a bunch of German on it. I'm guessing it's pretty damn old hah
    Last edited by Mrhsides1989; 06-18-2017 at 09:43 PM.

  2. #22
    Verified VCDS User
    Join Date
    Jun 2017
    Location
    Canada
    Posts
    12
    Post Thanks / Like
    I just finished my semester of school and have owned the Rosstech cable for 4 days. Now that I have some time I will start to eliminate the issues one by one but unless a warning or CEL came up in the past I wasn't all that concerned nor aware for that matter.

  3. #23
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    574
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    I don't think the RNS-E existed in 2002.

    Only 8Es with a heavy equipment load have a K2 line. Cars with lesser equipment have 56-Radio on K1. I went through all of the cars I could find on my local dealer's lot with a VAG-1552 and VAS-6017 to find one with two K-lines back in the fall of 2001. I'm not sure it's 100% indicative, but the strongest correlation I could find was whether the car had Xenons or not.

    -Uwe-
    Good point, AFAIK the RNS-E first appeared in 2003 on 2004 models (I still have an original map DVD with 0050 firmware) and my 2003 8E S4 had an RNS-D (did that also use K2?) - I was trying to think of some modules(s) that used the K2 line...

  4. #24
    Verified VCDS User
    Join Date
    Jun 2017
    Location
    Canada
    Posts
    12
    Post Thanks / Like
    well I finally found the broken wires in my door harness. I no longer have any fault codes on my scan. I still cant program my new remote to my car for some reason. I've attempted the adaptation process numerous times but when I read channel 21 it will not allow me to enter a new stored key value. Anybody else had issues programming their new remote? Thanks guys

  5. Likes Uwe, vwtech liked this post
  6. #25
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    14,822
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Mrhsides1989 View Post
    I still cant program my new remote to my car for some reason. I've attempted the adaptation process numerous times but when I read channel 21 it will not allow me to enter a new stored key value. Anybody else had issues programming their new remote? Thanks guys
    Are you sure you're using the correct procedure for your car?



    -Uwe-
    Ceterum censeo, delenda est Daesh.

  7. Likes Jack@European_Parts liked this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •