-
Verified VCDS User

Originally Posted by
sergiocorleon
Thanks no problem Dana, I tested it's ok now, I did ''back'' and the ''bottom left of the silver keys'' to go in the hidden green menu. But unfortunately the green menu is poor, I cannot modify the splash screen of the HMI :-(?
Do you have a tips for that? and about VIM?
thanks.
This is how the A4 B9 is coded - maybe it is the same on the Q7 - just with Q7 instead of A4:
Code:
[17 - Instruments]
[Coding - 07] -> [Long Coding Helper] -> Byte 9
A4 (small logo): Bit 5 and 7 - Set this bit manually to “1”
A4 (large logo): Bit 0, 5 and 7 - Set these bits manually to “1”
A4 L: Bit 1, 5 and 7 - Set these bits manually to “1”
A4 quattro: Bit 0, 1, 5 and 7 - Set these bits manually to “1”
A4 g-tron: Bit 2, 5 and 7 - Set these bits manually to “1”
A4 L quattro: Bit 0, 2, 5 and 7 - Set these bits manually to “1”
A4 (large logo): Bit 1, 2, 5 and 7 - Set these bits manually to “1”
A4 g-tron quattro: Bit 0, 1, 2, 5 and 7 - Set these bits manually to “1”
Rene Larsen
Audi A4 Avant 3.0 TDI quattro tiptronic MY2009 - sold
VCDS 18.2.0 (HEX-V2)
-
Post Thanks / Like - 1 Likes
Dana liked this post
-
Hello Rene,
Thanks but I already tested, your procedure can modify the screen in the speedpanel but not in the HMI screen.
-
Hello Dana, do you have something available to modify the splash screen in the HMI please? and the VIM unlocking?
Thanks per advance.
-
Ross-Tech Employee
Hi Philippe,
I do not have any additional suggestions but this thread would receive more views in the Tweaks section. Since you are Verified now I'll move it out of the New User Forum.
Best,
Dana
-
Post Thanks / Like - 1 Likes
Uwe liked this post