Now my other module started error (translated from Dutch to English)
For this forum, please use data from the English version of VCDS. You can download it here and install it in parallel with your Dutch version.
-Uwe-
The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.
Wednesday,17,May,2017,20:13:05:37369
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 17.4.2.3 (x64)
Data version: 20170505 DS270.4
www.Ross-Tech.com
VIN: WVWZZZAAZGD007446 License Plate:
Mileage: 29940km-18603mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: AA (1S0)
Scan: 01 03 09 15 17 19 25 44 56 61 AD
VIN: WVWZZZAAZGD007446 Mileage: 29940km-18603miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: Malfunction 0010
56-Radio -- Status: OK 0000
61-Battery Regul. -- Status: OK 0000
AD-Brake Sensors -- Status: Malfunction 0010
-------------------------------------------------------------------------------
Address 01: Engine (J623-CHYA) Labels: 04C-906-020-CHY.clb
Part No SW: 04C 906 020 CK HW: 04C 907 309 P
Component: R3 1.0l MPI H24 2101
Revision: UNH24---
Coding: 00110012020401000000
Shop #: WSC 31414 790 00001
ASAM Dataset: EV_ECM10MPI01104C906020CK 001004
ROD: EV_ECM10MPI01104C906020CK.rod
VCID: 66C2391399F6347796-8032
No fault code found.
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 1S0-614-517.clb
Part No SW: 1S0 614 517 L HW: 1S0 614 517 L
Component: EBC 460 ESP H16 0023
Serial number: A00U3TB
Coding: 12BF24712BAD02F848FE24F9D4AF40505FB100
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_Brake1ESPEBC460TRW 002004
ROD: EV_Brake1ESPEBC460TRW_002_VW25.rod
VCID: 387EA76B83C27287F4-806C
1 Fault Found:
0360 - Steering angle sensor
B1168 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 1S0-937-08x-09.clb
Part No SW: 1S0 937 090 D HW: 1S0 937 090 D
Component: PQ25 BCM H59 0584
Revision: -8------ Serial number: --------------
Coding: 62B82B0000010000000001F42C2BAC807340424E7E031460200000460100
Shop #: WSC 31414 790 00001
VCID: 3466935B97AA96E7D8-8060
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels: 5K0-959-655.clb
Part No SW: 1S0 959 655 B HW: 1S0 959 655 B
Component: VW10Airbag01Q H03 0006
Revision: -------- Serial number: 003MY00EFN7W
Coding: 000000000000000000000000000000003151
Shop #: WSC 31414 790 00001
ASAM Dataset: EV_AirbaVW10BPAVW12X 001001
ROD: EV_AirbaVW10BPAVN750.rod
VCID: 3D70B67FACE057AF27-8068
Crash sensor for side airbag: driver side:
Serial number: 3497ARB400K54QISRINT
Crash sensor for side airbag: front passenger side:
Serial number: 3507ARB401654R159ARX
Crash sensor for front airbag: driver side:
Serial number: 3557BRB404T3EENAD1P.
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 1Sx-920-xxx-17.clb
Part No SW: 1S0 920 861 B HW: 1S0 920 861 B
Component: KOMBI H52 0405
Revision: X0052001 Serial number: 00000000000000
Coding: 1142010000
Shop #: WSC 31414 790 00001
ASAM Dataset: EV_KombiUDSMM9RM10 A05803
ROD: EV_KombiUDSMM9RM10_A05_VW12.rod
VCID: 306E9F4B6BB2AAC7BC-8064
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: None
Part No SW: 1S0 909 901 HW: 1S0 937 090 D
Component: GW-K-CAN TP20 H59 0584
Revision: -8------
Coding: 001200
Shop #: WSC 31414 790 00001
VCID: 70EE5F4BA332EAC7FC-8024
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 1S0 920 861 B
Component: IMMO H52 0405
Revision: X0052001 Serial number: 00000000000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_ImmoUDSMM9RM10 A01702
ROD: EV_ImmoUDSMM9RM10_VW01.rod
VCID: 6ADA4D238DEE1017B2-803E
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J792) Labels: 6Rx-909-144-V2.clb
Part No SW: 6R1 909 144 AJ HW: 6R1 909 144 E
Component: EPS_TRW_ALow 312 3132
Serial number: CF661034
Coding: 000700
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_SteerAssisUDSTRW 016029
ROD: EV_SteerAssisUDSTRW.rod
VCID: 7F0C8C77E66C85BF75-802A
3 Faults Found:
1094656 - Steering angle sensor
B1168 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 167
Mileage: 29943 km
Date: 2017.05.17
Time: 19:39:43
1073664 - Steering End Stops Not Learned
C10AC F0 [137] - Unknown Error Elaboration
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 167
Mileage: 29943 km
Date: 2017.05.17
Time: 19:39:43
1073920 - Steering End Stops Not Learned
C10AC F0 [137] - Unknown Error Elaboration
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 167
Mileage: 29943 km
Date: 2017.05.17
Time: 19:39:43
-------------------------------------------------------------------------------
Address 56: Radio (J503) Labels: 5M0-035-1xx-56.clb
Part No SW: 1S0 035 156 HW: 1S0 035 156
Component: Radio 567 5543
Revision: AA001001 Serial number: VWZ8Z1R5235156
Coding: 0000020801
Shop #: WSC 31414 790 00001
VCID: 68DE372B9BE22207A4-803C
No fault code found.
-------------------------------------------------------------------------------
Address 61: Battery Regul. (J840) Labels: 1K0-907-534.clb
Part No SW: 1S0 907 534 HW: 1S0 937 090 D
Component: Batt-regelung H59 0584
Serial number: --------------
Coding: 032B7864
Shop #: WSC 31414 790 00001
VCID: 70EE5F4BA332EAC7FC-8024
Subsystem 1 - Part No SW: 1S0 915 181 B HW: 1S0 915 181 B
Component: J367-BDM H08 0210
No fault code found.
-------------------------------------------------------------------------------
Address AD: Brake Sensors (J939) Labels: 1S0-907-201.clb
Part No SW: 1S0 907 201 A HW: 1S0 907 201 A
Component: CV-SENSOR H07 0460
ASAM Dataset: EV_CVSen 001001
ROD: EV_CVSen.rod
VCID: 285E772B5362E20764-807C
1 Fault Found:
4113 - Databus
U1123 00 [008] - Received Error Message
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 39
Reset counter: 207
Mileage: 29567 km
Date: 2017.05.15
Time: 20:13:58
End-------------------------(Elapsed Time: 01:41)--------------------------
I tried to calibrate the steering angle sensor, but it stays showing me 0 on the measuring blocks.
tried to pull out the battery, and reset by driving max 20kmh.
tried to doe Steering Limit Stop: No or Incorrect Basic Setting / Adaptation from the main site, didnt help either..
:'(
Last edited by Uwe; 05-17-2017 at 03:40 PM.
Reason: QUOTE -> CODE
How can I trouble shoot this, or the fact that the angle sensor reads only 0° degree
Or a link that I can follow up, I can imagen that others had this issue and reported it milion times, but I can't seem to solve it as suggested in other topics...
Mainly because most of them have MK6 or Mk5 other modules etc..
I heard that here in near the border of Belgium that someone does make it work (dont know how)...
But i didn't payed 500+ euro for just not beeing able to calibrate the freaking steering angle sensor
Fyi, I tried all the procedures of G85 / steering angle sensor on channel 44 or 3 ... Non of them work or can be done with the procedure.
Pulling out the battery didn't help either...
here the video that i made, please don't judge my filming
I can't start the calibration , it stops doing anything, did i miss something??