-
Verified VCDS User
Volkswagen UP! ABS module lost data?
Hi folks,
For a mate, for testing purposes I swapped the tacho from his car to my car.
Which resulted that after i swapped my orignal tacho back the lights show up like on a christimas three...
I managed to bring back the damage, but some of the modules I just could not resolve.
Does anybody have codes / or suggestion how to solve the following result?
P.s. The immo = Okay, car drives like old, but the sensors are kinda messed up..
Some technical info:
Year: 2015
Model: Volkswagen UP!
Engein: 999 cc B 44 KW FM5 95 13
full scan result:
Code:
Maandag,03,April,2017,12:44:46:37369
VCDS -- VAG/VAS Emulator onder Windows Loopt op Windows 10 x64
VCDS Versie: PRI 17.1.3.0
Data versie: 20170224 DS267.4
www.Ross-Tech.com
Chassisnummer: WVWZZZAAZGD007446 Kenteken:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Adres 44: Stuur Hulp Labels: 6Rx-909-144-V2.clb
Regelapparaat Onderd.nr.: 6R1 909 144 AJ HW: 6R1 909 144 E
Component en/of Versie: EPS_TRW_ALow 312 3132
Software Codering: 000700
Dealernummer: WSC 31414 790 00001
ASAM Dataset: EV_SteerAssisUDSTRW 016029 (VW12)
ROD: EV_SteerAssisUDSTRW_SE26.rod
VCID: 7F0C8C77E66C85B990-802A
1 Fout Gevonden:
6351360 - Ongevaluitschakeling is geactiveerd
P1609 00 [009] - -
Bevestigd - Getest sinds Wissen Geheugen
Freeze frame:
Fout Status: 00000001
Fout Prioriteit: 1
Fout Frequentie: 1
Reset Teller: 254
KM-stand: 28371 km
Datum: 2019.14.07
Tijd: 03:35:12
Motortoerental: 1181 /min
Rijsnelheid: 0.00 km/h
Systeemstatus: defect
Status contact 15: Contact 15 aan
Spanning contact 30: 14.79 V
Stroomopname stuurbekrachtiging: 0.50 A
Stroomopname stuurbekrachtiging: 0.50 A
Eindtraptemperatuur: 17 °C
Stuurondersteuning: motorvermogen: 0.00 %
Sensor voor motorpositie: 0 °
Sensor voor motorpositie: 0 /min
Stuurondersteuning: voorgeschreven motorkoppel: 0.00 Nm
Stuurkoppel: -0.00 Nm
Stuurkoppel: OK
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Adres 44: DTCs gewistZondag,14,Mei,2017,14:32:33:37369
VCDS -- VAG/VAS Emulator onder Windows Loopt op Windows 10 x64
VCDS Versie: PRI 17.1.3.0
Data versie: 20170224 DS267.4
www.Ross-Tech.com
Chassisnummer: WVWZZZAAZGD007446 Kenteken:
Adres 03: ABS Remmen Labels: 1S0-614-517.clb
Regelapparaat Onderd.nr.: 1S0 614 517 L HW: 1S0 614 517 L
Component en/of Versie: EBC 460 ESP H16 0023
Software Codering: 00000000000000000000000000000000000000
Dealernummer: WSC 00000 000 00000
ASAM Dataset: EV_Brake1ESPEBC460TRW 002004 (VW12)
ROD: EV_Brake1ESPEBC460TRW_VW12.rod
VCID: 387EA76B83C2728111-806C
5 foutcodes gevonden:
0360 - Sensor voor stuurhoek
B1168 54 [137] - Kalibratie niet aanwezig
MIL AAN - Bevestigd - Getest sinds Wissen Geheugen
0361 - Sensor voor dwarsversnelling
C1079 54 [137] - Kalibratie niet aanwezig
MIL AAN - Bevestigd - Getest sinds Wissen Geheugen
0362 - Langsversnellingssensor
C1017 54 [137] - Kalibratie niet aanwezig
MIL AAN - Bevestigd - Getest sinds Wissen Geheugen
0363 - Sensor voor verdraaiing wagen
C107D 54 [137] - Kalibratie niet aanwezig
MIL AAN - Bevestigd - Getest sinds Wissen Geheugen
0485 - Regelapparaat niet gecodeerd
U1013 00 [137] - -
MIL AAN - Bevestigd - Getest sinds Wissen Geheugen
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: AA (1S0)
Scan: 01 03 09 15 17 19 25 44 56 61 AD
Chassisnummer: WVWZZZAAZGD007446 KM-stand: 29520km
01-Motor -- Status: OK 0000
03-ABS Remmen -- Status: Functioneert niet 0010
04-Stuurhoeksensor -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instrumenten -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Startblokkering -- Status: OK 0000
44-Stuur Hulp -- Status: OK 0000
56-Radio -- Status: OK 0000
61-Batterij Regul. -- Status: OK 0000
AD-Rem Sensoren -- Status: Functioneert niet 0010
-------------------------------------------------------------------------------
Adres 01: Motor (J623-CHYA) Labels: 04C-906-020-CHY.clb
Onderdeelnr. SW: 04C 906 020 CK HW: 04C 907 309 P
Component: R3 1.0l MPI H24 2101
Revisie: UNH24---
Codering: 00110012020401000000
Dealer #: WSC 31414 790 00001
ASAM Dataset: EV_ECM10MPI01104C906020CK 001004
ROD: EV_ECM10MPI01104C906020CK.rod
VCID: 66C2391399F6347173-8032
Geen foutcodes gevonden.
Gereedheid: 1110 0001
-------------------------------------------------------------------------------
Adres 03: ABS Remmen (J104) Labels: 1S0-614-517.clb
Onderdeelnr. SW: 1S0 614 517 L HW: 1S0 614 517 L
Component: EBC 460 ESP H16 0023
Serienummer: A00U3TB
Codering: 00000000000000000000000000000000000000
Dealer #: WSC 00000 000 00000
ASAM Dataset: EV_Brake1ESPEBC460TRW 002004
ROD: EV_Brake1ESPEBC460TRW_VW12.rod
VCID: 387EA76B83C2728111-806C
5 foutcodes gevonden:
0360 - Sensor voor stuurhoek
B1168 54 [137] - Kalibratie niet aanwezig
MIL AAN - Bevestigd - Getest sinds Wissen Geheugen
0361 - Sensor voor dwarsversnelling
C1079 54 [137] - Kalibratie niet aanwezig
MIL AAN - Bevestigd - Getest sinds Wissen Geheugen
0362 - Langsversnellingssensor
C1017 54 [137] - Kalibratie niet aanwezig
MIL AAN - Bevestigd - Getest sinds Wissen Geheugen
0363 - Sensor voor verdraaiing wagen
C107D 54 [137] - Kalibratie niet aanwezig
MIL AAN - Bevestigd - Getest sinds Wissen Geheugen
0485 - Regelapparaat niet gecodeerd
U1013 00 [137] - -
MIL AAN - Bevestigd - Getest sinds Wissen Geheugen
-------------------------------------------------------------------------------
Adres 09: Cent. Elect. (J519) Labels: 1S0-937-08x-09.clb
Onderdeelnr. SW: 1S0 937 090 D HW: 1S0 937 090 D
Component: PQ25 BCM H59 0584
Revisie: -8------ Serienummer: --------------
Codering: 62B82B0000010000000001F42C2BAC807340424E7E031460200000460100
Dealer #: WSC 31414 790 00001
VCID: 3466935B97AA96E13D-8060
Geen foutcodes gevonden.
-------------------------------------------------------------------------------
Adres 15: Airbags (J234) Labels: 5K0-959-655.clb
Onderdeelnr. SW: 1S0 959 655 B HW: 1S0 959 655 B
Component: VW10Airbag01Q H03 0006
Revisie: -------- Serienummer: 003MY00EFN7W
Codering: 000000000000000000000000000000003151
Dealer #: WSC 31414 790 00001
ASAM Dataset: EV_AirbaVW10BPAVW12X 001001
ROD: EV_AirbaVW10BPAVN750.rod
VCID: 3D70B67FACE057A9C2-8068
Ongevalsensor voor zij-airbag: bestuurderszijde:
Serienummer: 3497ARB400K54QISRINT
Ongevalsensor voor zij-airbag: bijrijderszijde:
Serienummer: 3507ARB401654R159ARX
Ongevalsensor voorairbag: bestuurderszijde:
Serienummer: 3557BRB404T3EENAD1P.
Geen foutcodes gevonden.
-------------------------------------------------------------------------------
Adres 17: Instrumenten (J285) Labels: 1Sx-920-xxx-17.clb
Onderdeelnr. SW: 1S0 920 861 B HW: 1S0 920 861 B
Component: KOMBI H52 0405
Revisie: X0052001 Serienummer: 00000000000000
Codering: 1142010000
Dealer #: WSC 31414 790 00001
ASAM Dataset: EV_KombiUDSMM9RM10 A05803
ROD: EV_KombiUDSMM9RM10_A05_VW12.rod
VCID: 306E9F4B6BB2AAC159-8064
Geen foutcodes gevonden.
-------------------------------------------------------------------------------
Adres 19: CAN Gateway (J533) Labels: Geen
Onderdeelnr. SW: 1S0 909 901 HW: 1S0 937 090 D
Component: GW-K-CAN TP20 H59 0584
Revisie: -8------
Codering: 001200
Dealer #: WSC 31414 790 00001
VCID: 70EE5F4BA332EAC119-8024
Geen foutcodes gevonden.
-------------------------------------------------------------------------------
Adres 25: Startblokkering (J334) Labels: 5K0-920-xxx-25.clb
Onderdeelnr. SW: 5K0 953 234 HW: 1S0 920 861 B
Component: IMMO H52 0405
Revisie: X0052001 Serienummer: 00000000000000
Dealer #: WSC 00000 000 00000
ASAM Dataset: EV_ImmoUDSMM9RM10 A01702
ROD: EV_ImmoUDSMM9RM10_VW01.rod
VCID: 6ADA4D238DEE101157-803E
Geen foutcodes gevonden.
-------------------------------------------------------------------------------
Adres 44: Stuur Hulp (J792) Labels: 6Rx-909-144-V2.clb
Onderdeelnr. SW: 6R1 909 144 AJ HW: 6R1 909 144 E
Component: EPS_TRW_ALow 312 3132
Serienummer: CF661034
Codering: 000700
Dealer #: WSC 00000 000 00000
ASAM Dataset: EV_SteerAssisUDSTRW 016029
ROD: EV_SteerAssisUDSTRW_SE26.rod
VCID: 7F0C8C77E66C85B990-802A
Geen foutcodes gevonden.
-------------------------------------------------------------------------------
Adres 56: Radio (J503) Labels: 5M0-035-1xx-56.clb
Onderdeelnr. SW: 1S0 035 156 HW: 1S0 035 156
Component: Radio 567 5543
Revisie: AA001001 Serienummer: VWZ8Z1R5235156
Codering: 0000020801
Dealer #: WSC 31414 790 00001
VCID: 68DE372B9BE2220141-803C
Geen foutcodes gevonden.
-------------------------------------------------------------------------------
Adres 61: Batterij Regul. (J840) Labels: 1K0-907-534.clb
Onderdeelnr. SW: 1S0 907 534 HW: 1S0 937 090 D
Component: Batt-regelung H59 0584
Serienummer: --------------
Codering: 032B7864
Dealer #: WSC 31414 790 00001
VCID: 70EE5F4BA332EAC119-8024
Subsysteem 1 - Onderdeelnr. SW: 1S0 915 181 B HW: 1S0 915 181 B
Component: J367-BDM H08 0210
Geen foutcodes gevonden.
-------------------------------------------------------------------------------
Adres AD: Rem Sensoren (J939) Labels: 1S0-907-201.clb
Onderdeelnr. SW: 1S0 907 201 A HW: 1S0 907 201 A
Component: CV-SENSOR H07 0460
ASAM Dataset: EV_CVSen 001001
ROD: EV_CVSen.rod
VCID: 285E772B5362E20181-807C
1 Fout Gevonden:
12291 - Extern regelapparaat
P150F 00 [009] - Verkeerde codering
Bevestigd - Getest sinds Wissen Geheugen
Freeze frame:
Fout Status: 00000001
Fout Prioriteit: 7
Fout Frequentie: 1
Reset Teller: 102
KM-stand: 29528 km
Datum: 2017.05.14
Tijd: 19:20:58
Einde----------------------(Tijd verstreken: 01:39)------------------------
Pls help this poor fella out with some coordinates?
Last edited by Boki Ar; 05-14-2017 at 02:29 PM.
Reason: [Quote] = [Code]
-
Verified VCDS User
Do you have a saved copy of a previous Auto-Scan for your car anywhere? If not but you've done a previous Auto-Scan of your car in the past, look in the "C:\Ross-Tech\VCDS\Scans" folder and you will find auto saved copies any previous scans you've done. Make sure that any you look at are for your car. You can tell by looking at the VIN number which is specified in the name of the saved Auto-Scan file and also in the content of the file.
If you look in one of the recent saved Auto-Scan file (either one you've saved yourself or one that has been auto-saved), you should be able to find and retrieve the original coding value for your ABS module. Then just re-code your ABS module using that code.
EDIT: Also, please register your interface with Ross-Tech so we know we are helping a member who has purchased an genuine interface cable. You can do that here: http://www.ross-tech.com/vca/index.php
Last edited by GaryM; 05-14-2017 at 01:35 PM.
Reason: Added registration info
-
Post Thanks / Like - 4 Likes
-
Verified VCDS User
@GaryM,
Thanks for the quick reply! Yesterday I had no chance to look into it, will do it today and notify you what I got.
And I have already filled the form for registering my cable (before my forum account was created), but I understood It could take a day or so.
So I though I will try through the forum in meanwhile
-
Benevolent Dictator

Originally Posted by
parvizio
And I have already filled the form for registering my cable (before my forum account was created),

Joined forum: May 14 08:25
Product registration received: May 14 12:08
Verified: May 15 10:08

-Uwe-
The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.
-
Post Thanks / Like - 1 Likes
-
Verified VCDS User
Guys,
Today I tried to put the codes from a the donor car (same year UP!) but no success...
I get errors Error 31: Request out of range - Coding Rejected...

Why do I get this error, I tried all combinations.... I even tried it from other module with ending: 1S0 614 517 E
Im confused...
-
Verified VCDS User
BTW the L and E version of the ABS module have same coding in the UP! models...
-
Are you sure the coding it is from an VW Up and not an Seat Mii ?
You can try this:
12BF24712BAD02F848FE24F9D4AF40505FB100
I guess it is correct (but cannot be sure), but I doubt it is accepted anyway, there is probably more needed, but you can test it.
-
Post Thanks / Like - 4 Likes
-
Verified VCDS User
-
Verified VCDS User
Now my other module started error (translated from Dutch to English)
Monday, 15, May, 2017, 20: 02: 50: 37369
VCDS Version: PRI 17.1.3 Runs on Windows 10 x64
Www.Ross-Tech.com
Address 44: Send Help Labels: 6RX-909-144-V2.CLB
Control device Part no .: 6R1 909 144 AJ HW: 6R1 909 144 E
Component and / or Version: EPS_TRW_ALow 312 3132
Software Encryption: 000700
Deal Number: WSC 00000 000 00000
ASAM Dataset: EV_SteerAssisUDSTRW 016029 (VW12)
RED: EV_SteerAssisUDSTRW_SE26.rod
VCID: 7F0C8C77E66C85B990-802A
2 error codes found:
1073664 - steering wheel.
C10AC F0 [137] - Final learning not learned
MIL ON - Confirmed - Tested since Clear Memory
Freeze frame:
Error Status: 00000001
Error Priority: 4
Error Frequency: 1
Reset Counter: 136
KM position: 29567 km
Date: 2020.14.03
Time: 19:53:18
1073920 - Steer.
C10AC F0 [137] - Final learning not learned
MIL ON - Confirmed - Tested since Clear Memory
Freeze frame:
Error Status: 00000001
Error Priority: 4
Error Frequency: 1
Reset Counter: 136
KM position: 29567 km
Date: 2020.14.03
Time: 19:53:18
-
Verified VCDS User
You will need to calibrate the "Steering End Stops" for your steering assist to clear these fault codes. This can be found under "Basic Settings" in Control Module 44.
I'm not sure of the exact procedure for the VW UP! but I'm sure RT or someone else on here will be able to describe the steps you need to follow.
-
Post Thanks / Like - 1 Likes