Results 1 to 5 of 5

Thread: S3 8P ABS Coding Help!

  1. #1
    Unverified
    Join Date
    May 2017
    Location
    UK
    Posts
    2
    Post Thanks / Like

    S3 8P ABS Coding Help!

    Hi, I'm new the the forum amd joined to get some advice, I don't yet have VCDS but I plan to buy it when funds allow. I've recently bought a 2008 Audi S3 Sportback and the lights behind the cluster were taped over and warning message saying break fault on start up. I've removed the tape from the cluster lights and the traction control, ABS and handbrake lights are flashing. I had it scanned and it was say no communication with the ABS module so I've had a play with the wires and fuses and that fault seems to have gone. I'm now left with these faults
    Code:
    Removed.  Data from pirated copies of VCDS is not welcome here!
    What I want to know is this now just a coding issue and if so can it be dons using VCDS? Thanks in advance.
    Last edited by Uwe; 05-13-2017 at 04:30 PM. Reason: Missing information

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    13,908
    Post Thanks / Like
    Blog Entries
    1
    If you don't yet have VCDS, where did the data you posted come from?

    Yes, I think those faults can be fixed with VCDS, although coding an MK60EC1 can be a bit hit or miss.

    -Uwe-
    Ceterum censeo, delenda est Daesh.

  3. Likes Jack@European_Parts liked this post
  4. #3
    Unverified
    Join Date
    May 2017
    Location
    UK
    Posts
    2
    Post Thanks / Like
    A mate of mine scanned it to help put me in the right direction but he isn't to clued up in coding unfortunately.

  5. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    13,908
    Post Thanks / Like
    Blog Entries
    1
    Yeah, well, tell your mate that he's caused you great shame...

    -Uwe-
    Ceterum censeo, delenda est Daesh.

  6. #5
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    8,770
    Post Thanks / Like
    Yeah shame shame shame..........
    European Parts Emporium/Performance / Immobilizer Solutions LLC
    Certified Master Trained ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Service/SMOG Updates/Data Transfer/Off Road Tuning Only! & Parts

    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  7. Likes Zenerdiode liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •