Results 1 to 5 of 5

Thread: there is "replacement dpf option" on VCDS? + picture

  1. #1
    New User
    Join Date
    May 2017
    Location
    Israel
    Posts
    2
    Post Thanks / Like

    there is "replacement dpf option" on VCDS? + picture

    i have garage, and i work with VAG cars.
    usually the DPF ( disel particular filter ) was clogged. so i clean it, and later use with software to "reset DPF" ( without regeneration ) .
    its not "REGENERATION"
    its reset dpf ( after manual reneneration, with Special machine)


    my qustion is: if you have this option on VCDS?
    thanks.

    ("replacement of dpf" ) is as the picture.




  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    13,908
    Post Thanks / Like
    Blog Entries
    1
    VCDS gives you access to the actual functions needed to do that, but exactly how it's done varies by engine type (and by the protocols the ECU uses).

    -Uwe-
    Ceterum censeo, delenda est Daesh.

  3. #3
    New User
    Join Date
    May 2017
    Location
    Israel
    Posts
    2
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    VCDS gives you access to the actual functions needed to do that, but exactly how it's done varies by engine type (and by the protocols the ECU uses).

    -Uwe-
    Hello
    I asked about renewal, because last week I got a car of the type:

    Vw Touareg, 3.0 Diesel BKS engine, year: 2006- 2007.(the first year with DPF ).

    I've cleaned the particle filter. I did not have any options to replace the filter particles.
    (I work with 3 different types of diagnostics).
    I had to go to the company to reset the problem, and set up a replacement.
    Is it possible to define a particle filter replacement in this model? Thank you

  4. #4
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Posts
    2,328
    Post Thanks / Like
    Yes, it should be possible in that BKS with VCDS. Please check the Scans folder on that PC (C:\Ross-Tech\VCDS\Scans) and post the Auto-Scan if you have one saved so we can see which controller was installed.

    If you don't have a scan from this vehicle make sure to run/save one from the next vehicle you have a procedural question about so it can be posted with the inquiry.

  5. Likes Vasco Ferraz liked this post
  6. #5
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    13,908
    Post Thanks / Like
    Blog Entries
    1
    Since this is posted in Pre-Sales Support, I'm supposing the OP doesn't have VCDS yet...

    -Uwe-
    Ceterum censeo, delenda est Daesh.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •