Results 1 to 4 of 4

Thread: Audi RS6 C7 lowering of DRC suspension

  1. #1
    Verified VCDS User
    Join Date
    Jan 2017
    Location
    UK
    Posts
    33
    Post Thanks / Like

    Audi RS6 C7 lowering of DRC suspension

    Anybody know of the correct procedure to enable this.
    √ƇṖ ƇΛИ ṖŔᎾ + √ĪM FĪĿƐS ~ √ƇDS ĤƐӾ √②

  2. #2
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Posts
    2,543
    Post Thanks / Like
    I think that car would use a 4G or 4H part number 34 module with Component: LUFE-DAEMPFER but please post the Auto-Scan so we can see the exact modules.

    http://forums.ross-tech.com/showthre...t-an-Auto-Scan

    There are a few calibration procedure threads floating around for 4G/4H cars but this one might add clarity:

    http://forums.ross-tech.com/showthre...ll=1#post35982

  3. Likes Uwe liked this post
  4. #3
    Verified VCDS User
    Join Date
    Jan 2017
    Location
    UK
    Posts
    33
    Post Thanks / Like
    Quote Originally Posted by Dana View Post
    I think that car would use a 4G or 4H part number 34 module with Component: LUFE-DAEMPFER but please post the Auto-Scan so we can see the exact modules.

    http://forums.ross-tech.com/showthre...t-an-Auto-Scan

    There are a few calibration procedure threads floating around for 4G/4H cars but this one might add clarity:

    http://forums.ross-tech.com/showthre...ll=1#post35982

    I believe VCDS software can recalibrate the pneumatic suspension on the A6 models.

    DRC & Magride suspension needs ODIS software to recalibrate the suspension.



    Address 14: Susp. Elect. Labels: None
    Part No SW: 4G0 907 376 HW: 4G0 907 376 A
    Component: J250 DRC FahrwerH02 0040
    Revision: 00000000 Serial number: 00894020575400
    Coding: 0000000
    Shop #: WSC 02391 785 00200
    VCID: 6B80CDC0EF896E1FE8B-803E

    No fault code found.

  5. Likes Dana liked this post
  6. #4
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Posts
    2,543
    Post Thanks / Like
    Right, I do not have a procedure for #14 (DRC). Thanks for the scan clip though!

    That #14 uses the older CAN protocol (i.e. not UDS) so if you have regular access to any vehicles with that type of controller a pair of control module maps and complete Auto-Scan via e-mail would be excellent.

  7. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •