Results 1 to 1 of 1

Thread: Retrofit Steering wheel A3 8V 2.0TDI - not working

  1. #1
    Pirate
    Join Date
    Apr 2017
    Location
    Italy
    Posts
    1
    Post Thanks / Like

    Exclamation Retrofit Steering wheel A3 8V 2.0TDI - not working

    Dear all, This is my first massage from Sicily!

    I'm tring to install a new MFSW stering wheel with also s-tronic paddles.

    I bought a multifunctional steering wheel with pads on ebay (8U0419091AD) and airbag cable (8U0971589C).

    Basically once installed the buttons turned on for 15 minutes ... the next day they did not light up anymore ... I thought that without encoding the control unit disabled the buttons instead of the encoding following the procedure (equal to that Above) has changed nothing ...

    Resumed the airbag cable connections and unplugged the connector on the ring and rested ... always for 15 minutes ... if i turn off, the steering wheel buttons remained lit ... after 15 minutes again
    here there is a scan of the car.
    Code:
    Removed.  Data from pirate copies of VCDS is not welcome here.
    here what i used for the coding:
    Code:
    Select STG 16 (steering wheel)  
    STG Coding -> Function 07  
    Byte 0  Enable Bit 1  
     
    Select STG 17 (panel / tachometer)  
    STG Coding -> Function 07  
    Byte 10  
    Enable Bit 7  
     
    Select STG 19 (Diagnostic Interface / Gateway)  
    STG Coding -> Function 07  
    Byte 1  
    Enable Bit 0  
     
    Select STG 5F (infotainment)  
     
    STG Coding -> Function 07  
    Byte 24 enable Bit 1 must become 1 
     
    STG Adjustment -> Function 10  
    (1) Select list of functions -Car CAN MFL  
    Adjust Enabled value  
     
    Select the list of functions (29) of the BAP MFL_0x0F vehicle  
    Adjust Enabled value  
     
    (77) list of BAP MFL_Jocker_0x34 Select vehicle features  
    Adjust Enabled value  
     
    (146) of the Vehicle Select Operation Menu-menu_display_MFL_jocker  
    Adjust Enabled value  
     
    (148) vehicle menu operation-menu_display_MFL_jocker_over_threshold_high  
    Adjust Enabled value  
    Last edited by Uwe; 04-27-2017 at 06:00 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •